6.20

[rado3105]

6.20 is being prepared to release, we will release the newest version shortly.
We will be happy to receive feedback about 6.20rc from you.

What's new in 6.20rc15 (2014-Sep-25 13:28):

*) fetch - fixed problem where files fetched over https were trimmed in size;
*) fixed problem - it was not possible to see & uninstall dude package;
*) stores are replaced with folders and disks are now managed under /disk menu;
*) added support for SMSC750x USB Gigabit Ethernet on x86;
*) ups - support selftest for smart and hid UPS;
*) pppoe client - increase connection timeout to make connection establishment
possible on busy pppoe server;
*) dhcp server - change default lease time from 3 days to 10 minutes
to avoid running out of IPs;
*) ipsec - allow binding modeconf address to username;
*) eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have new features:
auto mtu (enabled by default for new tunnels);
dscp (inherit/specific value, inherit by default for new tunnels);
clamp-tcp-mss (yes by default for new tunnels);
*) eoip/gre/ipip/6to4 tunnels have dont-fragment option (inherit/no, no by default for new tunnels);
*) bridge has auto mtu feature (enabled by default for new bridges);
*) pppoe-server has auto mtu feature (enabled by default for new pppoe servers);

NOTE1: In v6.20rc all non-ppp tunnel interfaces got optimized and common set of features,
this is important step in direction to add fast path support to those interfaces.
Please, test non-ppp tunnels and report back with results.

NOTE2: 6.20rc15 is going through final testing, it will be the release as version 6.20.
Please, test and report back any persisting issues, so that we can fix that till final release.
http://forum.mikrotik.com/viewtopic.php?f=9&t=89545


Neskúšal niekto? obzvlášť tie vylepšenia tunelov vyzerajú zaujímavo - dont fragment....

[michnzee]

Tak 20tka je tady, to jsem zvědav jak to zahýbe s těmi tunely a když už je tam zmínka o UPS, funguje vám na rb2011 monitoring klasický smartky od APC? nebo to nemá cenu stále zkoušet...

[okoun]

ale nikde nepíšou něco o tom že by wireless-fp bylo již součástí standardního wireless, je tedy a nebo není?

[Rosak]

Podle dema stále existují oba balíčky zvlášť..

[eKrajnak]

Otestované:

RB 2011 - v poriadku, ale balík Dude 4.0beta3 vyťažuje CPU na 100% .. nejaký bug, po downgrade na 6.19 je to zase OK, ale DUDE bolo kompletne zresetované ...
RB Omnitik - OK
RB SXT 5Hnd (bridge, NV2) - OK
RB 433 - OK

[milpa]

Na mé RB433UAH po aktualizaci na 6.20 není nikde dostupná SDkarta (zapisuji na ní logy).
Po downgrade na 6.19 opět vše OK

[Tomáš Nesrsta]

Nevíte jam mám donutit CCR1009 k upgradu? Ted je tam 6.10 a když dím "download & upgrade" tak se balíček stáhne ale nenainstaluje a v logu je ze system rebooted because of kernel failure

[rado3105]

treba skusit vsetky moznosti, niekedy to neslo cez menu winboxu...ale len cez terminal...cize nahraj tam balik downloadom alebo skus cez ssh....potom daj cez terminal reboot...

[thanui.linux]

Jeden spoj a dva kusy SXT G-5HPacD.
Jeden OK, ale cas od casu hodi na LAN 10Mbit studenenej reboot to resi.
druhy KO az do netinstalu.

Jeste ze je to testovaci spoj. Akorat si uz prestavam pripadat u tiku jako betatester, ale spis jako alpha.

[rado3105]

upgradovane: 1x rb433ah, 4x rb2011, 2x rb750g, 1x rb911...zatial nepozorujem ziadne problemy, prechod prevazne zo 6.19...ak idete z 5.25...treba najprv upgrade na 5.26

[pcwifi]

sel sem na 6.20 z 5.21 (RB711) a vse ok... zatim taky zadny pruser (sxt,groove,711,912) toz huvidime...

[honza198]

CCR1016G, OMNITIK, SEXTANT = OK

[pcwifi]

SXT G-5HPnD r2 , cpu na 100% , nutno slezt na 6.19

[honza198]

nasel jsem jeden bug, a to, ze je problem se SNMP, da se vyresit disable a enable v menu "/ip snmp"

[hapi]

já sem našel že nejde instalovat x86 z isa háže to chybějící soubor.