What's new in 6.43 (2018-Sep-06 12:44):
MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - added IPv6 support;
!) cloud - added support for licensed CHR instances (including trial);
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
!) winbox - minimal required version is v3.15;
----------------------
Changes in this release:
backup - added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added an option to manually specify ports that have a multicast router (CLI only);
bridge - added a warning when untrusted port receives a DHCP Server message when DCHP Snooping is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - added more options to fine-tune IGMP Snooping enabled bridges (CLI only);
bridge - added per-port based "tag-stacking" feature;
bridge - added support for BPDU Guard;
bridge - added support for DHCP Option 82;
bridge - added support for DHCP Snooping;
bridge - added support for IGMP Snooping fast-leave feature (CLI only);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - fixed "ingress-filtering", "frame-types" and "tag-stacking" value storing;
bridge - forward LACPDUs when "protocol-mode=none";
bridge - ignore tagged BPDUs when bridge VLAN filtering is used;
bridge - improved packet handling;
bridge - improved packet processing when bridge port changes states;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
bridge - renamed option "vlan-protocol" to "ether-type";
capsman - added ability to use chain 3 for "HT TX chains" and "HT RX chains" selections (CLI only);
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
certificate - do not allow to perform "undo" on certificate changes;
certificate - fixed RA "server-url" setting;
check-installation - improved system integrity checking;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed interface name order when "virtio-net is not being used on KVM installations;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved balooning process;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
chr - reduced RAM memory required per interface;
cloud - added simultaneous IPv4/IPv6 support;
cloud - close local UDP port if no activity;
console - added "dont-require-permissions" parameter for scripts;
console - added error log message when netwatch tries to execute script with insufficient permissions;
console - added error log message when scheduler tries to execute script with insufficient permissions;
console - do not show spare parameters on ping command;
console - made "once" parameter mandatory when using "as-value" on "monitor" commands;
console - removed automatic swapping of "from=" and "to=" in "for" loops;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs326/crs328 - fixed packet forwarding when port changes states with IGMP Snooping enabled;
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added hardware support for DHCP Snooping and Option 82;
crs3xx - added Q-in-Q hardware offloading support;
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed SwOS config import;
defconf - fixed default configuration for RBSXTsq5nD;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-client - fixed "add-default-route" parameter;
dhcpv6-client - fixed option handling;
dhcpv6-client - improved dynamic IPv6 pool addition process;
dhcpv6-server - added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time";
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dhcpv6-server - do not allow to run DHCPv6 server on slave interface;
dhcpv6-server - fixed dynamic simple queue creation for RADIUS bindings;
dns - fixed DNS cache service becoming unresponsive when active Hotspot server is present on the router (introduced in 6.42);
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
ethernet - properly handle Ethernet interface default configuration;
export - do not show w60g password on "hide-sensitive" type of export;
fetch - added "as-value" output format;
fetch - fixed address and DNS verification in certificates;
filesystem - fixed NAND memory going into read-only mode (requires "factory-firmware" >= 3.41.1 and "current-firmware" >= 6.43);
filesystem - improved software crash handling on devices with FLASH type memory;
health - added missing parameters from export;
health - fixed voltage measurements for RB493G devices;
health - improved speed of health measurement readings;
hotspot - allow to properly configure Hotspot directory on external disk for devices that have flash type storage;
hotspot - fixed RADIUS CoA & PoD by allowing to accept "NAS-Port-Id";
ike1 - added unsafe configuration warning for main mode with pre-shared-key authentication;
ike1 - purge both SAs when timer expires;
ike1 - zero out reserved bytes in NAT-OA payload;
ike2 - fixed initiator first policy selection;
ike2 - fixed rekeyed child deletion during another exchange;
ike2 - improved basic exchange logging readability;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
interface - improved interface "last-link-down-time" and "last-link-up-time" values;
interface - improved reliability on dynamic interface handling;
ippool - improved used address error message;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule;
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - fixed AES-192-CTR fallback to software AEAD on ARM devices with wireless and RB3011UiAS-RM;
ipsec - fixed AES-CTR and AES-GCM key size proposing as initiator;
ipsec - fixed "static-dns" value storing;
ipsec - improved invalid policy handling when a valid policy is uninstalled;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - improved stability when using IPsec with disabled route cache;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
l2tp - allow setting "max-mtu" and "max-mru" bigger than 1500;
led - improved w60g alignment trigger;
leds - fixed LED behaviour when bonding is configured on SFP+ interfaces;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional D-Link PIDs;
lte - added additional ID support for SIM7600 modem;
lte - added additional low endpoint SIM7600 PIDs;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US;
lte - added "registration-status" parameter under "/interface lte info" command;
lte - added roaming status reading for info command;
lte - added "sector-id" to info command;
lte - added support for alternative SIM7600 PID;
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed LTE registration in 2G/3G mode;
lte - fixed SIM7600 registration info;
lte - fixed SIM7600 series module support with newer device IDs;
lte - ignore empty MAC addresses during Passthrough discovery phase;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc";
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
mac-telnet - improved reliability when connecting from RouterOS versions prior 6.43;
multicast - allow to add more than one RP per IP address for PIM;
ntp - allow to specify link-local address for NTP server;
ospf - improved link-local LSA flooding;
ospf - improved stability when originating LSAs with OSPFv3;
package - renamed "current-version" to "installed-version" under "/system package install";
ppp - added support for additional ID for E3531 modem;
ppp - added support for Alfa Network U4G modem;
ppp - added support for Telit LM940 modem;
ppp - improved modem mode switching;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
rb1100ahx4 - added DES and 3DES hardware acceleration support;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
routerboard - fixed wrongly reported RAM size on ARM devices;
routerboot - removed RAM test from TILE devices (routerboot upgrade required);
sfp - fixed default advertised link speeds;
smb - fixed valid request handling when additional options are used;
sms - converted "keep-max-sms" feature to "auto-erase";
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
sms - improved reliability on SMS reader;
snmp - added CAPsMAN "remote-cap" table;
snmp - added EAP identity to CAPsMAN registration table;
snmp - added "phy-rate" reading for "station-bridge" mode;
snmp - added "temp-exception" trap;
snmp - fixed interface speed reporting for predefined rates;
snmp - fixed "remote-cap" peer MAC address format;
ssh - disconnect all active connections when device gets rebooted or turned off;
ssh - strengthen strong-crypto (add aes-128-ctr and disallow hmac sha1 and groups with sha1);
supout - added "files" section to supout file;
supout - added info log message when supout file is created;
supout - added monitored bridge VLAN table to supout file;
supout - added "w60g" section to supout file;
switch - added CPU Flow Control settings for devices with a Atheros8227, QCA8337, Atheros8327, Atheros7240 or Atheros8316 switch chip;
switch - added support for port isolation by switch chip;
switch - fixed possible switch chip hangs after initialization on MediaTek and Atheros8327 switch chips;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tile - added DES and 3DES hardware acceleration support;
tile - fixed false HW offloading flag for MPLS;
tr069-client - allow editing of "provisioning-code" attribute;
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
tr069-client - use SNI extension for HTTPS;
upgrade - fixed RouterOS upgrade process from RouterOS v5 on PowerPC;
ups - improved UPS serial parsing stability;
usb - fixed modem initialisation on LtAP mini;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
userman - fixed "shared-secret" parameter requiring "sensitive" policy;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - added ability to specify MCS range (CLI only);
w60g - added "beamforming-event" stats counter;
w60g - fixed random disconnects;
w60g - general stability and performance improvements;
watchdog - added "ping-timeout" setting;
webfig - do not automatically re-log in after logging out;
webfig - fixed occasional authentication failure when logging in;
webfig - fixed www service becoming unresponsive;
webfig - properly display time interval within Kid Control menu;
webfig - properly handle double clicking when logging in or out;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added bridge Fast Forward statistics counters;
winbox - added "poe-fault" LED trigger;
winbox - added "tag-stacking" option to "Bridge/Ports";
winbox - allow to specify LTE interface when sending SMS;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed "bad-blocks" value presence under "System/Resources";
winbox - fixed bridge port MAC learning parameter values;
winbox - fixed "IP/IPsec/Peers" section sorting;
winbox - fixed "write-sect-since-reboot" value presence under "System/Resources";
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - renamed "VLAN Protocol" to "EtherType" under bridge interface "VLAN" tab;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
wireless - accept only valid path for sniffer output file parameter;
wireless - accept only valid path for sniffer output file parameter;
wireless - added "czech republic 5.8" regulatory domain information;
wireless - added "etsi2" regulatory domain information;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - added option to disable PMKID for WPA2;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed "/interface wireless sniffer packet print follow" output;
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 reliability on ARM devices;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - require "sniff" policy for wireless sniffer;
wireless - updated "czech republic" regulatory domain information;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x;
Toto je původní verze internetového fóra ISPforum.cz do února 2020 bez možnosti registrace nových uživatelů. Aktivní verzi fóra naleznete na adrese https://telekomunikace.cz
Verze 6.43
Ahoj,
řádná porce - copak se asi skrývá za
řádná porce - copak se asi skrývá za
wireless - updated "czech republic" regulatory domain information;
0 x
Fíkus píše:Ahoj,
řádná porce - copak se asi skrývá zawireless - updated "czech republic" regulatory domain information;
Rozdělení na 5,2-5,6 (czech republic) a 5,8GHz (czech republic 5,8GHz) Takže pozor ať nejste překvapeni, že se vám nespojí spoj.
0 x
Síť není jen internet ...
Tak jsem upgradoval routery u sebe doma. CRS125 vše bez problému.
wAP-AC problém - po upgradu se nepřihlásím přes winbox 3.17 (špatné jméno nebo heslo). Pritom to samé jméno a heslo funguje přes mac-telnet i přes webfig.
Takže bacha ať se nespálíte, reportováno...
wAP-AC problém - po upgradu se nepřihlásím přes winbox 3.17 (špatné jméno nebo heslo). Pritom to samé jméno a heslo funguje přes mac-telnet i přes webfig.
Takže bacha ať se nespálíte, reportováno...
0 x
Winbox povolený je. Port zůstal 8291, přesto se nejde přihlásit...
0 x
Je hlášeno dokonce zrušení všech hesel ... zůstalo jen přihlašování ssh s klíčem.
Ale já si to zkusil na CCR a žádný problém zatím nemám.
Ale já si to zkusil na CCR a žádný problém zatím nemám.
0 x
Jelikož je zde zakázáno se negativně vyjadřovat k provozním záležitostem, tak se holt musím vyjádřit takto: nové fórum tak jak je připravováno považuji za cestu do pekel. Nepřehledný maglajz z toho bude. Do podpisu se mi pozitiva již nevejdou.
Ty Sergejovy nové, novější a nejnovější winboxy během krátké doby mě už začínají zdvihat TK. Jestli tak bude pokračovat, budu si muset udělat odlišné očíslované ikony a i tak bude lišta zaplněna jen Winboxem. Kdyby aspoň byly, tak, jak je zvykem, zpětně kompatibilní ... mpcz, 10.sep.2018
0 x
Mohu potvrdit, RB450Gpřechod z 6.43.RC66 bez problémů, RBcAPGi přechod z 6.42.7 nelze se přihlásit. SSHčkem se do toho dostanu. winbox 3.17, putty nějaká z posledních verzí
honzam píše:Winbox povolený je. Port zůstal 8291, přesto se nejde přihlásit...
0 x
mpcz píše:Ty Sergejovy nové, novější a nejnovější winboxy během krátké doby mě už začínají zdvihat TK. Jestli tak bude pokračovat, budu si muset udělat odlišné očíslované ikony a i tak bude lišta zaplněna jen Winboxem. Kdyby aspoň byly, tak, jak je zvykem, zpětně kompatibilní ... mpcz, 10.sep.2018
A on Winbox není zpětně kompatibilní?
What's new in v3.16:
added back support for connecting to older RouterOS v6 versions;
0 x
Rád si nechám poradit, jak mít jeden Winbox pro všechny verze ROS. Předem děkuji. mpcz, 10.sep.2018
0 x
pokud máš pouze v6 což by si měl mít tak stačí winbox v3.17. Pokud máš RouterOS v5 a níž tak prostě winbox v2.9. To jsou tedy max dva.
0 x