Stránka 1 z 1

Verze 6.46.2

Napsal: 16 Jan 2020 16:15
od goblajz
What's new in 6.46.2 (2020-Jan-14 07:17):

*) chr - improved stability when changing ARP modes on e1000 type adapters;
*) console - prevent "flash" directory from being removed (introduced in v6.46);
*) console - updated copyright notice;
*) crs305 - disable optical SFP/SFP+ module Tx power after disabling SFP+ interface;
*) defconf - fixed "caps-mode" not initialized properly after resetting;
*) defconf - fixed default configuration loading on RBwAPG-60adkit (introduced in v6.46);
*) lora - fixed packet sending when using "antenna-gain" higher than 5dB;
*) lte - fixed "cell-monitor" on R11e-LTE in 3G mode;
*) lte - fixed "earfcn" reporting on R11e-LTE6 in UMTS and GSM modes;
*) lte - report only valid info parameters on R11e-LTE6;
*) ppp - fixed minor typo in "ppp-client" monitor;
*) qsfp - do not report bogus monitoring readouts on modules without DDMI support;
*) qsfp - improved module monitoring readouts for DAC and break-out cables;
*) routerboard - added "mode-button" support for RBcAP2nD;
*) security - fixed vulnerability for routers with default password (limited to Wireless Wire), admin could login on startup with empty password before default configuration script was fully loaded;
*) system - fixed "*.auto.rsc" file execution (introduced in v6.46);
*) system - fixed "check-installation" on PowerPC devices (introduced in v6.46);
*) traffic-generator - improved memory handling on CHR;
*) webfig - allow skin designing without "ftp" and "sensitive" policies;
*) webfig - fixed "skins" saving to "flash" directory if it exists (introduced in v6.46);
*) winbox - automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer";
*) winbox - fixed "Default Route Distance" default value when creating new LTE APN;
*) winbox - removed duplicate "join-eui" and "dev-eui" parameters under "Lora/Traffic";

Re: Verze 6.46.2

Napsal: 17 Jan 2020 09:57
od honza198
Pozor, do MK se nelze prihlasit pres WinBox ( je jedno ktera verze )! ! !

Re: Verze 6.46.2

Napsal: 17 Jan 2020 10:17
od Noxus28
? fakt ? nebude problém inde?
nahodené na test 951G-2hnd a problém nebol

Re: Verze 6.46.2

Napsal: 17 Jan 2020 10:19
od honza198
a co hEXP POE LITE?

Re: Verze 6.46.2

Napsal: 17 Jan 2020 10:19
od basty
normalne mi to funguje...

Re: Verze 6.46.2

Napsal: 17 Jan 2020 10:22
od honza198
hEX poe LITE jen textový režim (SSH, telnet aj.)

Re: Verze 6.46.2

Napsal: 17 Jan 2020 10:35
od Valerii
SXTsq5ac funguje

Re: Verze 6.46.2

Napsal: 17 Jan 2020 10:36
od honza198
potvrzeno: SXT funguji vsechny, 5 ks hEX poe LITE - vsechny jsou na tom stejne - pouze TXT

Re: Verze 6.46.2

Napsal: 17 Jan 2020 10:38
od Noxus28
HEX nemám na vyskúšanie.
HAP mini, RB450G, CCR, CHR vše ok

Re: Verze 6.46.2

Napsal: 17 Jan 2020 10:40
od honza198
921gs = ok; 2011 taky ok; tak nevim, kde soudruzi udelali chybku

Re: Verze 6.46.2

Napsal: 17 Jan 2020 11:46
od S_a_M
951G-2HnD ok, D52G-5Hac-D2HnD ok.

Re: Verze 6.46.2

Napsal: 17 Jan 2020 15:00
od Veverka_153
Disclite5 AC, RB750Gr3 funguje

Re: Verze 6.46.2

Napsal: 17 Jan 2020 16:20
od Sidi
honza198 píše:hEX poe LITE jen textový režim (SSH, telnet aj.)


hEX (RB750Gr3) v pohodě

Re: Verze 6.46.2

Napsal: 17 Jan 2020 22:32
od Macek
LHGG60ad OK!

Re: Verze 6.46.2

Napsal: 19 Jan 2020 14:53
od radek1
Zatím u jednoho MK (CCR1009) zjištěný problém, že po upgradu mi odškrtnul "TCP Syn Cookies"