What's new in 6.37.2 (2016-Nov-08 13:15):
Important note!!!
Dude client auto-upgrade to this version will not work. Use http://www.mikrotik.com/download for 6.37.2 client download/install.
It will be fixed in soon to be released v6.37.3
Toto je původní verze internetového fóra ISPforum.cz do února 2020 bez možnosti registrace nových uživatelů. Aktivní verzi fóra naleznete na adrese https://telekomunikace.cz
Verze 6.37.2
Verze 6.37.2
0 x
Vysoce odborných omylů se dopouští jen specialisté.
Jednou jsem se dotkl ukazováčkem UBNT a slezl mi z něho nehet. Od té doby na UBNT nesahám.
Jednou jsem se dotkl ukazováčkem UBNT a slezl mi z něho nehet. Od té doby na UBNT nesahám.
Chce to číst i dál:
Changes since 6.37.1:
!) ethernet - optimized packet processing on low load when irq re-balance is not necessary;
!) fastpath - let one packet per second through slow path to properly update connection timeouts;
!) queues - significantly improved hashing algorithm in dynamic simple queue setups (fixes CPU load spikes on queue removal);
*) arm - improved watchdog reliability;
*) bonding - fixed 802.3ad load balancing over routed VLANs with fastpath enabled;
*) bonding - fixed mac address selection after upgrade;
*) crs - fixed port mirroring halt after L2MTU change;
*) dhcp - do not allow to create dhcp-server on slave interface;
*) ethernet - fixed interface speed reporting for x86 in log after reboot or if "disable-running-check=yes";
*) ethernet - fixed potential loopprotect crash;
*) export - fixed "/interface ethernet switch export" on some boards;
*) export - fixed CRS switch egress-vlan-tag export;
*) fastpath - fixed kernel failure when fastpath traffic goes into loop;
*) fastpath - improved connection tracking timeout updates;
*) firewall - do not allow to increase/decrease ttl and hop-limit by 0;
*) firewall - fixed "connection-state" value disappearance in rules that were created before v6.22;
*) firewall - fixed compact export (introduced in 6.37rc14);
*) firewall - improved "time" option (ranges like 22h-10h now are acceptable);
*) hotspot - fixed nat rule dst-port by making it visible again for Walled Garden ip return rules;
*) ipsec - changed logging topic from error to debug for ph2 transform mismatch messages;
*) ipv6 - increased default max-neighbor-entries value to 8192, same as ipv4;
*) mmips - improved watchdog reliability;
*) package - show minimal supported RouterOS version under "/system resource" menu if it is specified;
*) queue - fixed rare crash on statistic gathering in "/queue tree";
*) queue - improved "time" option (ranges like 22h-10h are now usable);
*) rb2011 - fixed crash on l2mtu changes;
*) sms - fixed crash after modem has failed to start;
*) ssl - fixed potential memory leak ( when using dude for example);
*) torch - fixed aggregate statistics appearance;
*) traffic-flow - fixed dst-port reporting if connection is not maintained by connection tracking;
*) userman - fixed memory leak on user limitation calculations;
*) winbox - added led settings menu;
*) winbox - fixed missing switch menu for mmips devices;
Changes since 6.37.1:
!) ethernet - optimized packet processing on low load when irq re-balance is not necessary;
!) fastpath - let one packet per second through slow path to properly update connection timeouts;
!) queues - significantly improved hashing algorithm in dynamic simple queue setups (fixes CPU load spikes on queue removal);
*) arm - improved watchdog reliability;
*) bonding - fixed 802.3ad load balancing over routed VLANs with fastpath enabled;
*) bonding - fixed mac address selection after upgrade;
*) crs - fixed port mirroring halt after L2MTU change;
*) dhcp - do not allow to create dhcp-server on slave interface;
*) ethernet - fixed interface speed reporting for x86 in log after reboot or if "disable-running-check=yes";
*) ethernet - fixed potential loopprotect crash;
*) export - fixed "/interface ethernet switch export" on some boards;
*) export - fixed CRS switch egress-vlan-tag export;
*) fastpath - fixed kernel failure when fastpath traffic goes into loop;
*) fastpath - improved connection tracking timeout updates;
*) firewall - do not allow to increase/decrease ttl and hop-limit by 0;
*) firewall - fixed "connection-state" value disappearance in rules that were created before v6.22;
*) firewall - fixed compact export (introduced in 6.37rc14);
*) firewall - improved "time" option (ranges like 22h-10h now are acceptable);
*) hotspot - fixed nat rule dst-port by making it visible again for Walled Garden ip return rules;
*) ipsec - changed logging topic from error to debug for ph2 transform mismatch messages;
*) ipv6 - increased default max-neighbor-entries value to 8192, same as ipv4;
*) mmips - improved watchdog reliability;
*) package - show minimal supported RouterOS version under "/system resource" menu if it is specified;
*) queue - fixed rare crash on statistic gathering in "/queue tree";
*) queue - improved "time" option (ranges like 22h-10h are now usable);
*) rb2011 - fixed crash on l2mtu changes;
*) sms - fixed crash after modem has failed to start;
*) ssl - fixed potential memory leak ( when using dude for example);
*) torch - fixed aggregate statistics appearance;
*) traffic-flow - fixed dst-port reporting if connection is not maintained by connection tracking;
*) userman - fixed memory leak on user limitation calculations;
*) winbox - added led settings menu;
*) winbox - fixed missing switch menu for mmips devices;
0 x
Je to pár dnů ... ale přísahal bych, že to tam nebylo.
0 x
Jelikož je zde zakázáno se negativně vyjadřovat k provozním záležitostem, tak se holt musím vyjádřit takto: nové fórum tak jak je připravováno považuji za cestu do pekel. Nepřehledný maglajz z toho bude. Do podpisu se mi pozitiva již nevejdou.
ludvik píše:Je to pár dnů ... ale přísahal bych, že to tam nebylo.
První den. Myslím že v pondělí to tam fakt nebylo
0 x
Ono se to tam objevilo v pondělí nějak na večer po 18 hodině...
0 x
::RouterLEGOboard::
A lze mikrotiku vlastně věřit?
Tohle mám ve verzi 6.37.1
Jakéto překvapení, že to v 6.37.2 nelze. input does not match any value of interface
Zkontroluju, existuje bridge i vlana. Bridge má povolen firewall i na vlan.
Tak si to naklepu winboxem - a to samozřejmě jde. Ale výsledek?
Tohle mám ve verzi 6.37.1
Kód: Vybrat vše
/ip firewall filter> add action=add-src-to-address-list address-list=sysVlan52 address-list-timeout=1h5m chain=forward connection-state=new in-bridge-port=vlan52 in-interface=bridge1
Jakéto překvapení, že to v 6.37.2 nelze. input does not match any value of interface
Zkontroluju, existuje bridge i vlana. Bridge má povolen firewall i na vlan.
Tak si to naklepu winboxem - a to samozřejmě jde. Ale výsledek?
Kód: Vybrat vše
add action=add-src-to-address-list address-list=ttt address-list-timeout=1h5m chain=forward connection-state=new in-bridge-port=*E in-interface=bridge1
0 x
Jelikož je zde zakázáno se negativně vyjadřovat k provozním záležitostem, tak se holt musím vyjádřit takto: nové fórum tak jak je připravováno považuji za cestu do pekel. Nepřehledný maglajz z toho bude. Do podpisu se mi pozitiva již nevejdou.