classic.ISPforum.cz

What's new in 6.2 (2013-Aug-02 10:37):

*) console - added "on-error" argument to ':do' command that is executed if command raises error;
*) hotspot - fixed chap error after failed http-chap login (broken in v6.1);
*) console - added new ':return' command that interrupts execution of script and passes argument as return value if script was called as function;
*) routerboot - fixed upgrade from RouterOS (could fail on some units);
*) userman - fixed payment gateway response notify processing;
*) console - resolved issue with 'from-pool' propery in '/ipv6 address';
*) console - array value syntax in expressions '{1;2;3;4}' now can specify values with word keys as '{a=1;b=2}';
*) console - added 'verbose' argument to '/import' command that enables line-by-line script import. By default import whole script at once and don't print it, as it was in version 6.0;
*) console - ':global', ':local' and ':set' commands have new parameter 'do' that allows assigning block of commands to the variable;
*) console - global variables now are common to all users and are available to all users with at least "read,write,test,policy" policy;
*) console - fixed parameter passing to scripts. Script parameters can be accessed without declaring them with ':local' and ':global' commands. For backwards compatibility global variables are first looked up in script parametrs;
*) console - '$var 1 2 a="a" b="b"' syntax for passing parameters to commands stored in a variable. Parameters are accessed as '$1' '$2' '$a' '$b';
*) ipsec - fixed peer address matching;
*) ups - query smart ups capabilities before issuing any commands;
*) improved CCR responsiveness on other interfaces when one interface is under attack;
*) sms tool - added sim-pin setting;
*) dhcp server - framed routes are now also added to the server routing table;
*) dhcpv6 server - added binding-script option;
*) proxy - allow multiple src-address for ipv4 and ipv6;
*) eoip,gre tunnels could occasionally crash multicore router;
*) fixed bug - sometimes some types of interfaces would stop working;
*) ipsec sometimes could crash kernel on CCR;
*) connection tracking sometimes could crash kernel on CCR;
*) ppp,pptp,l2tp,sstp - added default-route-distance parameter;
*) scep - "/cert scep ra" merged into "/cert scep client" without saving ra config;
*) ipsec - fix phase1 autonegotiation on little endian platforms;
*) pppoe server - allow service with empty service-name to accept all pppoe clients;
*) lcd - current-screen option is replaced with "/lcd show" command
*) lcd - current-interface option is replaced with "/lcd interface display" command
*) graphing - make graphs stable on ppp & ovpn interfaces;
*) www, hotspot - fixed problem when www service stopped responding on high load;
*) winbox, webfig: allow to enter space in the text fields;
*) webfig - fixed configuration of VPLS & routing filters;
*) lcd - added option for enabling or disabling the touch screen;
*) lcd - added options for screen switching;
*) lcd - up to 10 non-physical interfaces can now be added to the lcd;
*) lcd - all interface graph screen can now be customized from /lcd interface page;
*) backup - changed default backup file name to <id>-<YY><MM><DD>-<HHMM>.backup for file browsers to sort them properly;
*) webfig - it did not work in Opera;
*) webfig - made terminal work again;
*) winbox - added ability to fully set up traffic generator in winbox;
*) trafficgen - allow ranges for ip addrs and udp ports;
*) trafficgen - add tcp header support;
*) queue simple - fixed bug - actual queue order sometimes was wrong;
*) queue simple - queue is not invalid when at least one of target interfaces is up;
*) fixed crash when setting master-port on AR8327 switch chips;
*) fixed addresslist - dynamic entries sometimes would still show up even afther being timed out;
*) added /ip settings allow-hw-fast-path setting to control AR8327N hardware ipv4 fast path;
*) vrrp - allow more than one vrrp on interface;

slušná dávka změn.
http://wiki.mikrotik.com/wiki/Manual:Sc ... #Functions
http://forum.mikrotik.com/viewtopic.php?f=9&t=75081

Upgrade z 6.1 je teda pekelně rychlej na to kolik je tam změn...

všechny upgrade mezi v6kama jsou rychlý. Nevim jak to dokázaly.

co si mohu představit u těch oprav queue simple?

) pppoe server - allow service with empty service-name to accept all pppoe clients; <<-- konečně bude to aspon blbu-vzdorne..

Vše funguje pouze když dám quick set tak winbox spadne vyzkoušeno u 2 RB cache vyčištěna dělá Vám to taky ? Po downgrade OK

zatim nasazeno na sxtlite a bez problema

DD,

tak jsem narazil na nekompatibility u skriptu.
- pokud skript nema pridelana nektera prava (vypada to , ze musi mit read,write,test,policy) pak se nedostane ke globalnim promennym
- s globalnima promennyma se v :if zachaci ponekud jinak nez ve starcich ROSEch (5.X a starsi). Napriklad
:global a
:if ($a != 5) do={
# inicializace promenne a
}

se chova tak jako by v $a byla hodnota 5 a inicializace promenne tak nikdy neprobehne

Dalibor Toman píše:- pokud skript nema pridelana nektera prava (vypada to , ze musi mit read,write,test,policy) pak se nedostane ke globalnim promennym

tak tohle je vlastnost dokonce zminena v ChangeLogu

Dalibor Toman píše:- s globalnima promennyma se v :if zachaci ponekud jinak nez ve starcich ROSEch (5.X a starsi). Napriklad
:global a
:if ($a != 5) do={
# inicializace promenne a
}

se chova tak jako by v $a byla hodnota 5 a inicializace promenne tak nikdy neprobehne

tohle je bug a pry to opravi

Hodil to niekto na rb2011 ako sa to sprava.
Taktiez ci su tam nejake vylepsenia nv2?

rekl bych ze 6x rada je hlavne o CCR a novych rb aka 2011 a tak podobne. NV2 uz bylo opraveno ve verzi 5.25 a nemyslim ze v rade 6.x budou resit wifi, ale jine veci ktere je/nas pali vic.

nebylo opravený nic. Sem tam se stále něco děje. Sekání nv2 u v6 je opravena tak, že prostě se wifina odpojí a připojí. Pozoruju to obden na jednom spoji kterej se sekal. Jestli je nepálí wifina tak nevim co by je už mělo pálit když 99 procent lidí používá na mkčku právě wifinu.

mam asi 10 ap s nv2 a zadneho sekani jsem si nevsiml, jen od verze 5.25 zmizely rekonekty a klienti drzi treba mesic pripojeni. K tematu sekani by bylo zajimave hodit sem detailni konfiguraci a pouzity HW protoze je to treba bug v MK, jelikoz me to proste zatim nikdy nikde neudelalo.

ADD: myslim ze je pali nejvice ruzne problemy s ccr a 2011, protoze to muze byt dobrej business a ruzne restarty ccr apod nedelaji znacce dobre

minulí týden jsem posílal screeny a supouty jednoho spoje co jel TXkem na 6Mbit. Všechno ok kromě toho že to prostě jelo na 6Mbit. je tam v5.25. RXko ukazovalo 130Mbit, TX protistrany 6Mbit. Divné že.