Verze 3.23

[jpg]

What's new in 3.23:

*) fixed installation on fresh disks or VMs;
*) add 802.1ad Service Tag support for VLAN;
*) wireless - fix for RTS/CTS when used together with dynamic ACK timeout;
*) serial ports are now grouped per USB device;
*) added gsm info command to ppp-client;
*) added URL support to fetch tool;
*) added dial-on-demand mode to PPTP & L2TP clients;
*) ssh - now non-interactive console commands can reference variables;
*) fixed TFTP server logging;
*) fixed problem - "/system upgrade" (autoupgrade) did not show proper package
architecture and was unable to fetch new packages;
*) fixed bug - hotspot 'walled garden ip' rules did not work on some boards
after reboot;
*) added '/interface print stats' command;
*) improved support for OSPF as PE-CE routing protocol;
*) added OSPF sham links;
*) fixed a bug in set-bgp-prepend-path routing filter;
*) fixed some MPLS TE reoptimize bugs;
*) added MPLS TE bandwidth management features;
*) netwatch - ignore items with interval 0s, this value was causing
netwatch to fail;
*) routing-test - added new type of gateway argument: ip address together with interface;
*) api - 'disabled' property was not available from api since 3.21, fixed;
*) api - added support for retrieving OID values;
*) api - removed special behaviour of 'find' command under API. Use
'print' command with queries instead of 'find'. This change fixes
scripts that are started from API and contain 'find' command.
*) console - removed support for octal numbers, now string of digits with
a leading zero is interpreted as decimal number;
*) console - added binary ~ operator that matches value against
POSIX extended regular expression;
*) console now accepts decimal numbers with k/K M G T P suffixes for
values of some properties;
*) console - fixed export problems:
if long line is wrapped just before space charater, the space character
has to be escaped, otherwise it is lost;
errors during export generated a comment line that was incorrectly enclosed
in quotes;
*) console - added binary ~ operator that matches value against
POSIX extended regular expression;
*) scheduler - added owner and policy properties; all existing
scheduler entries will get owner name "*sched" and policy
read,write,test;
*) routing-test - allow to specify that route gateway is in the main routing table;
*) added route cache statistics;
*) fixed mesh protocol;
*) graphing - fixed IP address mask display issue for low endian architectures;

[Jenya]

RB433 - OK.

[Jenya]

Zdar, nemate nekdo tuseni, kde najdu: *) added route cache statistics;

[soooc]

RB450 OK

[honzam]

RB450G OK

[reset]

x86 dualCore .... ok

[goblajz]

RB433AH, RB333 a RB133 všechno OK

[net.work]

x86 dualcore --- OK --- ale neupgradoval sem - byla to cista instalace a nasledne nahrani zalohy... ale i tak OK

[bart.simpson]

RB450 KO

Router dělá jen hlídacího psa. Má v netwatch cca 80 záznamů. Zhruba po 4 hodinách jde procesor na 100%. Pomůže restart zase na 4-5 hodin. Po navrácení na 3.22 je vše OK.

Kde asi udělali soudruzi z Litvy chybu....

[reset]

RB532A MKv2.9.48 -> MKv3.23 .... OK

[mikeg74]

Zdravicko, po upgrade na 3.23 jak na RB433 tak na RB532 mam pri jakekoli kombinaci nastaveni pri 5GHz frekvence po 5MHz je to normalni? Na 3.10 jsem mel pouze 19 kanalu pouzitelnych v CR. Mate to taky nekdo??? Je to jako kdyz ve 3.10 nastavim mod 5GHz-5MHz. Diky za info.

[Leeonek]

.....mam pri jakekoli kombinaci nastaveni pri 5GHz frekvence po 5MHz je to normalni?

Je

[eking]

Zdar, teď jsem se díval na changelog a u verze 3.23. je tam ještě jedna nová funkce:
What's new in 3.23:

*) added WakeOnLan tool
....

What's new in 3.23:

*) fixed installation on fresh disks or VMs;
*) add 802.1ad Service Tag support for VLAN;
*) wireless - fix for RTS/CTS when used together with dynamic ACK timeout;
*) serial ports are now grouped per USB device;
*) added gsm info command to ppp-client;
*) added URL support to fetch tool;
*) added dial-on-demand mode to PPTP & L2TP clients;
*) ssh - now non-interactive console commands can reference variables;
*) fixed TFTP server logging;
*) fixed problem - "/system upgrade" (autoupgrade) did not show proper package
architecture and was unable to fetch new packages;
*) fixed bug - hotspot 'walled garden ip' rules did not work on some boards
after reboot;
*) added '/interface print stats' command;
*) improved support for OSPF as PE-CE routing protocol;
*) added OSPF sham links;
*) fixed a bug in set-bgp-prepend-path routing filter;
*) fixed some MPLS TE reoptimize bugs;
*) added MPLS TE bandwidth management features;
*) netwatch - ignore items with interval 0s, this value was causing
netwatch to fail;
*) routing-test - added new type of gateway argument: ip address together with interface;
*) api - 'disabled' property was not available from api since 3.21, fixed;
*) api - added support for retrieving OID values;
*) api - removed special behaviour of 'find' command under API. Use
'print' command with queries instead of 'find'. This change fixes
scripts that are started from API and contain 'find' command.
*) console - removed support for octal numbers, now string of digits with
a leading zero is interpreted as decimal number;
*) console - added binary ~ operator that matches value against
POSIX extended regular expression;
*) console now accepts decimal numbers with k/K M G T P suffixes for
values of some properties;
*) console - fixed export problems:
if long line is wrapped just before space charater, the space character
has to be escaped, otherwise it is lost;
errors during export generated a comment line that was incorrectly enclosed
in quotes;
*) console - added binary ~ operator that matches value against
POSIX extended regular expression;
*) scheduler - added owner and policy properties; all existing
scheduler entries will get owner name "*sched" and policy
read,write,test;
*) routing-test - allow to specify that route gateway is in the main routing table;
*) added route cache statistics;
*) fixed mesh protocol;
*) graphing - fixed IP address mask display issue for low endian architectures;