Verze 3.22

[honzam]

What's new in 3.22:

*) added advanced switch features for RB450G;
*) added support for MetaROUTER on RB450G;
*) added support for adding physical interfaces to Metarouters;
*) added set-bgp-prepend-path action to routing filters;
*) added WinBox OSPFv3 support to routing-test package;
*) added WinBox IPv6 routes support to routing-test package;
*) console - added 'hide-sensitive' option to the export command;
*) user manager - fixed customer remove interface bug;
*) fixed Cisco BGP VPLS autodiscovery in mpls-test package;
*) fixed LDP to not disconnect on unknown capabilities of remote
peer (should help establish LDP session with Junos);
*) fixed ethernet port name reordering on RB493;
*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,
RB1000;
*) added '/interface ethernet print stats' command for RB450G and RB750;
*) fixed CSPF in routing-test to properly interpret link bandwidth;
*) added support for C-motech CNU-680 CDMA 1x EV-DO 450Mhz USB Modem;

What's new in 3.21:

*) backported MetaROUTER support for RB4xx from v4;
*) added WinBox MPLS & VPLS support mpls-test package;
*) added WinBox BGP support to routing-test package;
*) api - added query support for 'print' command;
*) added support for bsd-syslog;
*) added TFTP server;
*) added authorization and TLS support to email tool;
*) added pppoe-scanner;
*) added tftp protocol support to fetch tool;
*) fixed ipsec policy priority to work as documented;
*) fixed BGP route selection in routing package;
*) allow to use IPsec aggressive mode with pre-shared keys;
*) fixed some problems in mesh protocol;
*) fixed https proxying with parent proxy;
*) fixed Prism shared IRQ issue;
*) fixed multiple MPLS/VPLS bugs in mpls-test;
*) fixed boot problems on some RB1000s;
*) added /interface mesh traceroute command;
*) fixed web proxy source address selection;
*) fixed pcq queue - pcq sometimes could get through more traffic
than specified in max-limit;

[honzam]

rb532 OK

[honzam]

RB616 a RB750? že by nové modely?

[skilly]

133 OK (funguje ako verejny hotspot)

[Martin22]

No jaksi to neni odkud stahnout, na strankach mikrotiku to jeste v nabidce neni.

Pro stouraly: vim, ze prepsanim verze u all_package to stahnout lze, ale ja chci i routing-test a ten tam neni

[hunkao]

Už to tam je asi od 17:00

[Martin22]

Už to tam je asi od 17:00

Tak to jsem bud slepej nebo blbej.
Zkouseno ve Firefoxu a Opere a ani v jednom na strankach mikrotiku proste 3.22 neni, viz. screenshot.

[Stanislav Hrncir]

nemet balicky jinym zpusobem tak taky cucim jak na vrata od chleva..

[Martin22]

nemet balicky jinym zpusobem tak taky cucim jak na vrata od chleva..

Muzete prosim zverejnit svuj zdroj ? Diky

[reset]

to bude opet nejaka bugova pre release beta

[honzam]

to bude opet nejaka bugova pre release beta

To jsem čekal že to řekneš

[honzam]

Už to tam je asi od 17:00

Tak to jsem bud slepej nebo blbej.

http://www.mikrotik.com/download/router ... e-3.22.npk

[reset]

to bude opet nejaka bugova pre release beta

To jsem čekal že to řekneš

to jsem rad, ze jsem nesklamal

[hunkao]

Já jsem to taky nemohl najit a pak se mě to najednou na stránkách mikrotiku objevilo Ale už to tam nemužu najit.
Tu je odkaz od kud jsem stahoval soubor.
http://66.228.113.58/all_packages-mipsbe-3.22.zip

[Olda123]

Tak pokud to stahly tak na tom bude něco špatného . Riskovat to nebudu . Btw a co 3.21 ? nebo jsem něco prospal?