Stránka 1 z 1

účast v projektu lightningmaps.org

Napsal: 08 Jul 2014 17:45
od svestka
rádi bychom se zapojili, ale z jejich strany komunikace dooost vázne.
máte s tím někdo zkušenosti / kontakty?

koukal jsem se, že nejbližší stanice k nám je někde u Přerova ... kdybyste měl někdo kontakt, budu rád.
http://www.lightningmaps.org/blitzortung/europe/index.php?bo_page=statistics&bo_show=station&bo_sid=909&bo_station_id=874&lang=en

Petr

Re: účast v projektu lightningmaps.org

Napsal: 08 Jul 2014 22:34
od DarkLogic
Taky jsem zvažoval přidat se, ale když jsem trochu zkoumal, co je potřeba všechno po domácku sestavit, tak jsem se na to vykašlal. Ale kdyby byla nějaká souprava jako komplet, tak bych do toho šel.

Re: účast v projektu lightningmaps.org

Napsal: 08 Jul 2014 22:52
od ludvik
Prý existuje hotová. Jen zapojíš ... někdo mi to říkal.

A je fakt, že ten jejich nabídkový email (ještě jsem ho pořádně nečetl) tak vyznívá - koupíš vlastně všechno, jenom zapojíš.

Re: účast v projektu lightningmaps.org

Napsal: 08 Jul 2014 23:15
od okoun
také bychse přidal, kde se o tom píše? případně návod na výrobu či cena za hotové?

Re: účast v projektu lightningmaps.org

Napsal: 09 Jul 2014 00:21
od ludvik

Re: účast v projektu lightningmaps.org

Napsal: 09 Jul 2014 06:51
od svestka
Taky jsem žádal. Odezva nula.
Proto se ptám, zda má někdo jinou zkušenost ... kladnou. Na bastlení podomácku fakt není čas.

Re: účast v projektu lightningmaps.org

Napsal: 09 Jul 2014 08:45
od ludvik
Dear potential TOA Lightning detection participants,

welcome to Blitzortung.org. This is an automatically send email.

If you are interested in seting up an own detector, then please first
read carefully the documentations and visit at least one of the forums
linked at the page "Cover your Area". A documentation of System RED can
be found here

http://www.blitzortung.org/Documents/TO ... ng_RED.pdf

SETTING UP A TOA LIGHTNING DETECTOR IST NOT PLUG-AND-PLAY!!!

You definitely need some experiences in soldering of elektronic
components. The kits contain, among other things, several SMD ICs with
an SOIC8 housing.

**************************************************************************
******

You can get from us either a basic set that only contains the parts that
are difficult to get on most countries or a complete set. We do not
offer already assembled systems but only kits.


The prices of the basic sets are
a.) Controller board PCB 10.4, GlobalTop PA6H GPS module, SMA connector,
and a network connector for = 31.50 Euro.
b.) H-Field Amplifier board PCB 12.3c, 4xMCP6S91, 2xMCP6292, 2xLMH664,
and a programmed ATmega8 microcontroller for = 18.50 Euro.
c.) E-Field Amplifier board PCB 13.1b, 4xMCP6S91, 1xMCP6292, 3xLMH664,
1xTLE2426a, and a programmed ATmega8 microcontroller for = 21.00 Euro.
d.) E-Field Pre-Amplifier board and an ADA4891 for together = 4.00 Euro.


The prices of the complete sets are
A.) Controller 10.4 kit = 74.00 Euro
B.) H-Field Amplifier 12.3c kit = 31.95 Euro
C.) E-Field Amplifier 13.1b kit = 37.50 Euro
D.) E-Field Pre-Amplifier 14.1b kit = 7.65 Euro

E.) two 20cm ferrite rod antennas = 45 Euro
(you also can build your own loop antennas)
F.) STM32F4DISCOVERY board = 20 Euro
(you also can get this board from www.mouser.com world wide)
G.) external GPS antenna (SMA 5m) = 20 Euro
H.) amber display insted of a green display which is contained in set A
= 10 Euro


Additionally you need a 5 Volt USB power supply with mini USB plug and
some CAT network cable. The network cable is necessary to connect the
amplifier with the controller and to connect the controller with your
local area network.

The price for shipping varies between 7 and 40 Euro depending on the
weight of the order and the country you live.

From european Euro countries, I prefer money transfer to

Egon Wanke,
Fabriciusstrasse 10
D-40225 Duesseldorf
Germany

Account No. 0545474303
Postbank Hannover: 25010030

IBAN DE57 2501 0030 0545 4743 03
BIC PBNKDEFF250

You can also by PayPal to blitzortung@gmx.org . Then the price of X Euro
will increase by a factor of 1.02 for Euro Countries and by a factor of
1.04 for all other countries.

**************************************************************************
******

Most people from germany order a+b+E and pay by money transfer, then the
price is
(31.50+18.50+45+7) = 102.00 Euro (7 Euro for shipping)

Most people from European countries order A+B+E+F+G and pay by PayPal,
then the price is
(74+31.95+45+20+20+17)*1.02 = 212.11 Euro (17 Euro for shipping)

Most people from USA order A+B and pay by PayPal, then the price is
(74+31.95+10)*1.04 = 120.59 Euro (10 Euro for shipping because of the
low weight).

See also http://www.blitzortung.org/Documents/Order_List.pdf

If you are still interested, please send us your postal address and the
information about the parts you want.

Do not pay before you get a reply about the price for shipping and the
information that we have all the material on stock.

Regards and much fun,
Egon Wanke
DL1YDB